Hard Disk connecting Procedure

Tips about connecting Hard Disk

Master/Slave Settings

Now for a refresher course on hard drive connections. When connecting more than one hard drive to a computer on the same IDE controller, you generally have to assign one as the primary (master) and one as the secondary (slave). You do this by changing the jumpers on the hard drive next to the power connector. Normally, the drive will have a diagram to let you know which jumper should be set for a master drive and which to set for a slave drive. You'll notice in the picture below the jumpers are circled on the end of the drive and the top of the drive shows the diagram to follow. Below there is an example how to change master to slave and the details information about connection. Hope it will help you to connecting a new Hard Disk with an old one.